DLS moduLight

Specifications

No operating hours meter, no expensive replacement lamps, and no more red warning lamps. Now you can match colours withour worrying for years. The LED luminaire combines the high illuminance level of diodes with special Fresnel lenses for optimum homogeneity in illumination and minor reflection behavior. The continuously high light quality of the LEDs far exceeds the minimum requirements according to ISO 3664:2009 and ISO 3668. The mix of multiple coloured LEDs generates an even more harmonious and complete light spectrum than that of conventional fluorescent lamps.

Unique LED light technology by JUST, Fogra certified to ISO 3664:2009, Pat. No. US 8,592,748 B2
Switchable light: D50 and D65 according to ISO 3664 and ISO 3668
UV content can be enabled or disabled for either illuminant regarding new and old ISO standard
UV-ONLY: UV-A for the detection of optical brighteners
Continuously dimming and USB connection for soft proofing applications
No colour shifts while dimming
No preheating after turning on
20x longer operating life despite to fluorescent lamps (> 50.000 h)
Stable light output during the entire lifespan
Annual relamping not required
Best for medium and large formats
Extremely homogeneous as well as glare- and reflection-free illumination, thanks to Fresnel-type prismatic lens
Including lamp suspended from the ceiling by wire
2000 lux illuminance according to ISO standard
Colour Rendering Index (CRI) Ra ≥ 95
Exact colour coordinates (10°):
D50: x = 0.3478 / y = 0.3595 (≤ 0,002)
D65: x = 0.3138 / y = 0.3309 (≤ 0,002)
Low metamerism index in the visible range: ≤ 0.8 (MIvis)
Low metamerism index in the UV range: ≤ 0.6 (MIuv)
external controller "LED Remote Control" (available optionally)
(W x H x D: 33 x 12 x 4 cm)

Illuminant characteristics

Asymmetrical light design for viewing from one side (fixed viewing position)
Almost no reflection and glare
Switch off UV content for assessment to old ISO 3664
Noon daylight (LED 5000 K, D50 CIE)
Average daylight from the northern sky (LED 6500 K, D65 CIE)
UV-Only (UV-A)

Features

USB interface for connection to PC
Illuminants are dimmable

Applications

For flat viewing samples, such as paper, fabrics, coatings
Fit for soft proofing – Device brightness can be adapted to monitor brightness (for SP)
For 3D viewing samples made of different materials

Downloads

Datasheet 1-1200 [DE] Datasheet 1-1200 [EN/US] Datasheet 2-1200 [DE] Datasheet 2-1200 [EN/US] Datasheet 3-1200 [DE] Datasheet 3-1200 [EN/US] Assembly and Operating Instructions 1-1200 Assembly and Operating Instructions 2-1200 Assembly and Operating Instructions 3-1200 EC-Declaration JUST DLS moduLight